When a client contacts us for 3D scanning, the first 4 questions we ask are;
From those answers, we decide which of our 3 scanners we will need to use.
For large jobs from 300mm up to 10 metres, there is only one scanner we use and that is the Artec Eva Hand held 3D scanner.
This scanner uses structured light and a flash to capture high resolution surfaces with brilliant colour texture and it does it at an impressive speed too.
We often find ourselves smiling while scanning with it… it is just lovely to use!
Typically, scans are from 0.1mm to 0.50mm in accuracy.
This is particularly handy for scanning large objects like boat hulls, aircraft, automotive vehicles, motorcycles and earth moving equipment.
The Artec Eva is our latest addition to our studio and a truly wonderful piece of equipment.
For objects in size from 10mm up to 300mm, we always choose our NextEngine. It is built for small stuff!
The NextEngine scanner is a desk or tripod mounted unit and always needs to be within 2m of our PC workstation, so while it is a little bit mobile… we can’t for example, take it out on site very easily.
With its high degree of accuracy and excellent texture capture, it is always our go-to scanner for small stuff.
Its quick, easy and gets the job done nicely!
Rule of thumb accuracy here is 0.10mm to 0.3mm. The level of detail captured is entirely dependent on the surface colour, texture and quality. For example, plaster of Paris, cement, stone, wood, plastics and metals are very good for scanning with laser. Difficult surfaces are ones which are either very dark or shiny. If you have something with a dark or shiny surface, do not fear, we have a few tricks up our sleeve with which we can still get the job done…
Typical examples of things scanned with the NextEngine are pieces of jewelry, parts of guns, aircraft and vehicles, as well as small figurines and sculptures.